Mcd Hpht Diamond Plates for Cutting Tools
|FOB Unit Price:||US $40 US $160|
|Purchase Qty. (piece)||FOB Unit Price|
|Production Capacity:||5000 Pieces Per Month|
|Transport Package:||Plastic Bag|
|Payment Terms:||T/T, Paypal, Money Gram, Western Union|
- Model NO.: JSD12
- Classification of Diamond: Artificial
- Characteristics of Natural Diamond: Compressive Strength
- Application: Machinery and Electronics
- Trademark: JS
- Origin: China
- Type: Diamond
- Characteristic: High Thermal Stability
- Synthesis of Cubic Boron Nitride Method: High Pressure High Temperature
- Size: 3.0X3.0X1.1mm
- Specification: ISO9001: 2008
1.Easy-to-use toolmaking material
2.Excellent thermal stability
3.100 (four point) orientation on all faces
Our square shape big size synthetic diamond plates are compared to Element Six company,similar performance and reasonable price.
Mono Diamond Plates:
Our mono synthetic diamond products are produced by high pressure, high temperature(HPHT) synthesis, has highly consistent and predictable properties and behaviour.
Easy-to-use toolmaking material.
Uniform wear over the entire length of the dresser.
Choice of two dresser orientations.
Excellent thermal stability.
precision laser cutting
100 (four point) orientation on all faces.
1. applied to all kinds of high quality cutting tool;
2. applied to make tools for cutting and dressing hard materials;
3. used for cutting tools for non-ferrous and non-metallic materials,
4. dressers for wheel dressing, a variety of special knives, burnishing tools, wear parts, and wire drawing dies.
Outstanding thermal properties and very high thermal oxidation resistance. It is ideal for secure mounting when using traditional non-ferrous metal sintering. Alternatively, the synthetic single crystal diamond dressers can be brazed onto a dresser body using an active braze alloy in a non-oxidising environment.
Using PCD grinding techniques, the dressers can be shaped
in-situ to make cone, chisel and radiused shapes.
Wheel type WA46KV (300 mm diameter x 50 mm)
Speed 2300 rpm
Infeed 20microns per pass
Cross feed 0.4 m/min
Coolant Flood coolant
provide the toolmaker with exceptional ease of tool fabrication by virtue of the fact that the four-point faces are easily defined and located with their grinding directions as shown. By the simple expedient of rotating the logs through 45o about their central axis, it is possible to expose the two-point direction with its potentially greater wear resistance. Thus, the toolmaker and end user are provided with a wide variety of options for both manufacture and use.
Grades: JSD11 JSD21 JSD13 JSD23
Comparatively regular square plates shape, straight edge, almost no impurity, 2.5-4.5mm edge length, 1.0-1.2mm thickness, high strength.
Comparatively regular square plates shape, straight edge, containing a bit back spot or cracks but not too much, 2.5-4.5mm edge length, 1.0-1.2mm thickness, lower strength than JSD11.
Irregular plates shape, near square, not straight edge, almost no impurity, good transparency, 2-4mm edge length, 1.0-1.2mm thickness., high strength.
Irregular plates shape, near square, not straight edge, containing a bit back spot or cracks, good transparency,2-4mm edge length, 1.0-1.2mm thickness, lower strength than JSD13.